Android Tablet w/ Preloaded EthanolAnalyzer App
For those who don’t have an Android device, this is a low cost refurbished tablet with EthanolAnalyzer app pre-loaded. Charger included.
Make/Model: ONN 100005206
Screen Size: 7″ 1024 x 600
Memory: 16G
Audi Style Flex-Fuel Pigtail Extension Cable
Our ethanol analyzer kits ship with 3′ flex-fuel sensor cable, if that’s insufficient we have a 10′ extension cable.
FYI: Contact us if you’d prefer to have a custom length cable or ethanol analyzer kit with custom size cables or configuration.
Dodge Viper GenII GTS Throttle Cable Clip 1.0
There’s a Throttle Cable Clip fairy that’s running rampant throughout the Viper community that loves to steal these at night when you’re passed out drunk. This is the first version that is most OEM style-like that fits Gen II GTS. Vipers being sold without this infamous clip do not obtain coveted skyrocket values. This clip will thread onto the mounting bolt using great tremendous force and guaranteed to never accidentally lift like the OEM clip.
Although the OEM clip can probably still be purchased through dealer at a much lower cost. But one day……. it will go by way of green dohickey and cam sensor.
Nylon 3D printed, also available through Shapeways
Flex-Fuel Sensor
Flex Fuel Sensor 3/8″ Quick-connect Inlet/Outlet
VW/Audi style electrical connector
Sensor P/N: 06K907811B
Connector P/N: 1718653-1
50hz = 0%, 150hz = 100%
Ethanol Analyzer Case
Case for Aether 2021 version
GM Style In-Line Flex-Fuel Pigtail Extender
For those who already have a flex-fuel setup using a GM style sensor, this in-line pigtail extender will allow attachment of our Ethanol Analyzer (which uses the Audi style connector) without splicing. Power, Ground, and PWM signal are generally supplied by the existing harness.
GM to Audi Style Flex-Fuel Pigtail Converter
If you had already purchased a GM style flex-fuel sensor, this converter/adapter will allow you to use our Ethanol Analyzer with it.
Honda / Acura NSX Door Check Bushings
Honda no longer manufacturers these bushings. Over time they wear and deform creating play which cause a popping sound when opening/closing doors.
Fits ’91 , and probably other years. Two are OEM size, two are oversize for those who have increased wear in the armature.
Material is 3D printed Nylon from Shapeways.
Snap Ring Pliers Tool
65 degree tips make it ideal for disassembly and reassembly of TK10 family Turbo Keychain. Solid construction (non removable tips), fantastic durability, and a great addition to your toolbox. Get $2 off when using the coupon code “circlip” while purchasing a TK10-R or TK10-S.
TK10 Center Cartridge Standalone
TK10 Center Cartridge
028 Allen Hex Key Wrench for 0-80 Set Screws
3x .028 Allen Hex Key Wrench for 0-80 Set Screws
9Volt Battery Holder
Holder used in ScaledEngines Base unit.
For those interested in gathering all components individually and a DIY build, 3D printed parts may be purchased from Shapeways. All other components (motors, gears, wristpins, bearings) are common and readily available on the web.
Gear
Gears used on ScaledEngines crankshafts & N20 DC Motors.
For those interested in gathering all components individually and a DIY build, 3D printed parts may be purchased from Shapeways. All other components (motors, gears, wristpins, bearings) are common and readily available on the web.